PC80 X-Series; Listed to UL 1008, the standard for transfer switch safety.
The PowerCommand Transfer Switch Remote Annunciator allows you to remotely monitor up to eight X-Series transfer switches on one easy-to-read color LCD screen. At a glance, you will know the transfer switch position, source availability, and whether there are active events or alerts. An intuitive user interface provides you access to additional information for each transfer switch, including source voltage, frequency, alert logs, and command functions to initiate tests, override transfer timers, and load shed remotely.
PRODUCT Detail
Power Supply Inputs 24-14AWG
| 2x (Main and Optional Backup), diode isolated |
---|---|
Modbus RTU | 1x 3-wire RS485 network with Isolated ground and power supply |
Modbus TCP/IP | 1x RJ45 ISO 802-3 / IEEE 802.3 (10/100 Base-T) compliant |
Discrete Inputs Connect to GND Active 24-14AWG | Key lock and return signal (default state is locked, jumper between to unlock) Hardwire Connected ATS: 1x Source 1 Connected 1x Source 2 Connected 1x S1 Available 1x S2 Available 1x ATS Fault/Alarm |
Discrete Outputs Low Side Driver 0.5A DC Continuous 24-14AWG | 1x Any Alarm 6x Load Shed (Pre-assigned to ATS 3-8) Hardwire Connected ATS: 1x Remote Test |
Display | Built-in, TFT RGB 4.3″ |
DC Electrical Disturbances | IEEE C37.90.1, IEEE C37.90.2, and ISO 7637-2 compliant |
ISO 9001 | Manufactured under compliance with ISO9001 practices |
EMC | EN 61000-6-2, EN 61000-6-4 |
Impact Protection | EN 62262, EN 50102 |
Regulatory Certification | UL 1008 listed and marked, RoHS compliant |
- Connectivity — Supports communication up to 8 transfer switches simultaneously via RS485 Modbus RTU (1000m max. distance), Modbus TCP/IP (100m max. distance), and includes support for one hardwire connected control.
- Flexible mounting options — Three kits available for your convenience: Annunciator only, flush panel mounted with barrel-type keyed lock switch for ease of Installation In panel boards, and with wall-mountable Type 1 enclosure.
- No special tools needed – Capable of being setup and configured via the annunciator’s user interface without any additional software tools. Software tool Is available for firmware update support if needed. AC-204 (Last revised: 11/2022)
- Cybersecurity — Cummins is committed to protecting our products from cyber threats. The remote annunciator has three levels of California SB-327 compliant password protection. A keyed lock switch Input allows for quick access to test and shed commands while securing deeper functions and configurations.
- Third-party support — Supports basic annunciation (position, source availability, alarm) for one transfer switch via discrete I/O.
- Product certification — UL1008 listed, RoHS compliant
- Warranty and service — Backed by a comprehensive warranty and worldwide distributor service network.
ดาวน์โหลดโบร์ชัวร์สินค้า
ลงทะเบียนเครื่องยนต์และเครื่องกำเนิดไฟฟ้าของคุณวันนี้ เพื่อรับข้อมูลล่าสุดเกี่ยวกับสินค้า
ข้อมูลทางเทคนิค การซ่อมบำรุง และการขอคำแนะนำสำหรับคุณ