PRODUCT Detail
Cummins® commercial generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary Standby and Prime power applications.
Bore: 140 mm (5.51 in.)
Stroke: 165.0 mm (6.5 in.)
Displacement: 30.5 L (1860 in3)
Cylinder block: Cast iron, V 12 cylinder
Battery capacity: 1800 amps minimum at ambient temperature of -18 °C to 0 °C (0 °F to 32 °F)
Battery charging alternator: 35 amps
Starting voltage: 24 volt, negative ground
Fuel system: Direct injection: number 2 diesel fuel, fuel filter, automatic electric fuel shutoff
Fuel filter: Triple element, 10 micron filtration, spin-on fuel filters with water separator
Air cleaner type: Dry replaceable element
Lube oil filter type(s): Four spin-on, combination full flow filter and bypass filters
Standard cooling system: High ambient radiator
Cummins heavy-duty engine – Rugged 4-cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.
Alternator – Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.
Permanent Magnet Generator (PMG) – Offers enhanced motor starting and fault clearing short circuit capability.
Circuit breakers – Option for manually-and/or electrically-operated circuit breakers.
Control system – The PowerCommand® electronic control is standard equipment and provides total generator set system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentry™ protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.
Masterless Paralleling – An optional electrically operated circuit breaker can be added for a simple masterless paralleling solution.
Cooling system – Standard integral setmounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.
NFPA – The generator set accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.
Warranty and service – Backed by a comprehensive warranty and worldwide distributor network.
ดาวน์โหลดโบร์ชัวร์สินค้า
ลงทะเบียนเครื่องยนต์และเครื่องกำเนิดไฟฟ้าของคุณวันนี้ เพื่อรับข้อมูลล่าสุดเกี่ยวกับสินค้า
ข้อมูลทางเทคนิค การซ่อมบำรุง และการขอคำแนะนำสำหรับคุณ